Farm Agriculture Irrigation Water Pump Stainless Steel Centrifugal Water Pump

Farm Agriculture Irrigation Water Pump Stainless Steel Centrifugal Water Pump

Description / farm agriculture irrigation h2o pump

The pump of variety QI is a single stage, one suction (axial suction) centrifugal for pumping cleanse drinking water and the other liquids

bodily and chemically related to the clean h2o.The temperature of liquid shall not be above 80oC. This pump is
appropriate for community drinking water supply and drainage duties in industries and land irrigation also in agriculture.
Style responsibility and attributes: (at design level)

Velocity n: 2900rpm and 1450rpm
Inlet diameter: 50 to 200mm
Capability Q: six.3to 400m3/h
Head H: 5 to 125m

Application / farm agriculture irrigation water pump  

one.CZPTal engineering: Obvious water transportion,pressurization program,air 
situation water,circulation technique,fire extinguishing technique,swimming pool and drinking water circulation technique.  

two.CZPT : circulating cooling technique ,method drinking water for  papermaking and  paper pulp,steel generation,shipbuilding,sea trasportion,and other mafacturing sector

3.CZPT industry : water offer,mine drainage,making station,ect.

4.Other: municipal h2o supply,agricultural irrigation,and some other people.

Structure specification / farm agriculture irrigation drinking water pump  

one. Casing 2.Casing Protect three. Impeller
4. Shaft 5.Wear ring six. Impeller nut
seven. Brake gasket 8. Shaft sleeve 9. Gland
10. Water seal ring 11. Packing 12. Bearing bracket

one.QI type pump is created with performance and dimensions specified to the CZPT Regular
ISO 2858. The significant factors are casing (1) casing go over (2) impeller (3) shaft (4) wear ring (5)
shaft sleeve (8) bearing bracket (twelve) etc. ( See Fig 1 )

2.QI pump is divided into the casing and the casing cover from the back again encounter of the impeller i.e. back again
pull-out design and style.QI pump has the advantages for ease of inspection and maintenance. When inspection, only
dismantle the intermediate connector among pump coupling and motor coupling. The rotating component
can be entirely removed with out disturbing the casing, suction and discharge pipeline and motor

three.The pump volute form is composed of casing and casing cover. The rotating component consists of
impeller, shaft and rolling bearing. The rotating element is carried by the rolling bearings mounted in a
hanging bearing bracket and radial and axial thrust is supported by the bearings.

4.In order to equilibrium axial thrust, there are equally wear rings in front and at the back again of the vast majority of the
impeller and the equilibrium gap is on the back shroud of the impeller. The axial thrust of some pumps is not big
sufficient, so there is no wear ring and equilibrium gap at the back again of the impeller.

5.The shaft seal is made up of packing gland (9) water seal ring (10) and packing (11) to stop air from in
having or the volume of leakage. If there is a balance hole of the impeller, cavity for soft packing connects
to the impeller entrance. If liquid of the impeller entrance is at vacuum condition, it is straightforward for air entraining
alongside the floor of the shaft sleeve. So h2o seal ring is in the stuffing box. Strain water in the pump
volute is led to drinking water seal ring to be sealed. If there is no equilibrium hole of the impeller, liquid pressure at the
back confront of the impeller is higher than ambiance.There is no air leakage, so the h2o seal ring can not
be packed.

6.The shaft sleeve is on the shaft to stay away from excessive shaft use. There is “O” ring between the shaft and
the shaft sleeve to stop air entrance or water leakage together the matched area.

7.CZPT is transmitted from the motor to the pump by a adaptable coupling with the intermediate connector.
Rotation is clockwise when considered from the driven end. .

Company data

Any concerns, welcome to contact us:
 

Lilly Sun (Sales Manager)

 

 

 

HangZhou AN PUMP CZPT CO.,LTD.

Tel: 311 89940549

vacuum pump

As one of leading vacuum pump manufacturers, suppliers and exporters of products, We offer vacuum pump and many other products.

Please contact us for details.

Mail:sales@vacuum–pump.com

Manufacturer supplier exporter of vacuum pump

Recent Posts