High Quality Melt Gear Pump for Plastic Extrusion Line

High Quality Melt Gear Pump for Plastic Extrusion Line

Extrusion soften gear pump

CZPT pumps occur in a variety of varieties and dimensions to suit the demands of your extrusion, compounding or polymer production procedure.

Benifits of the metering pump melt gear pump
1. Stabilizing the output pressure—the pressure on extruder can be reduced by 30%-50% after using melt pumps.
2. improving the product quality
three. increasing the extrusion output—reducing pressure on screw and chaning the building pressure from “screw to die” to “melt pump to die”, so the screw can extrude the products with high efficiency. Mean while the back-pressure on the extruder can be adjusted, reducing the melt residence in screw cylinder, stabilizing the plasticizing process and improving the product’s quality and quantity.
4. prolonging the working life—the pressure of extruder screw can be lowered after using the melt pumps, so screw wear can be reduced consumable

Merchandise pictures

Technica info
1.Rotate speed: ≤60rpm(Adjustable)
2.Temperature: 400°C (max.) 
3.Max.Outlet pressure: 350Bar
four.Max.CZPTential pressure: 275Bar 
five.Heating method: CZPT Steel Cartridge Heater
six.CZPTening parts:  12.9 high-strength screws
7.Voltage: 380V(Others are optional)
8.Frequency: 50Hz(Others are optional)

Software fields
CZPTmer CZPT(film, pipe, plate, sheet, granulation )
Higher Temperature or Substantial Viscosity CZPT (Laptop, PMMA, Ab muscles, HIPS, PET, PVB, PS, PP, PA, PE, PVA)
CZPT Fiber CZPT (polyester for cotton-fiber, polypropylene )
Other CZPTmer CZPT CZPT (rubber, asphalt, paint, adhesives, coatings, lubricants)

CZPT info

Model of 
Gear pump

Quantity
(cc)
output
(kg/h)
Heatingpower
(kw)
Driving power
(kw)
Outlet  pressure
(Mpa)
Functioning
Temperature
(ºC)
GM-ME-thirty thirty thirty-150 3 three ≤35 ≤350
GM-ME-fifty 50 fifty-280 four 5.five ≤35 ≤350
GM-ME-a hundred a hundred 100-five hundred five seven.five ≤35 ≤350
GM-ME-one hundred fifty one hundred fifty two hundred-900 six eleven ≤35 ≤350
GM-ME-250 250 three hundred-1200 eight eighteen.five ≤35 ≤350
GM-ME-400 four hundred 400-1600 9.five 22 ≤35 ≤350
GM-ME-five hundred five hundred five hundred-2000 twelve 30 ≤35 ≤350
 Inlet pressure (Mpa) ≥1.0                  cleaning Temperature (ºC) ≤400

High Quality Melt Gear Pump for Plastic Extrusion Line

vacuum pump

As one of leading vacuum pump manufacturers, suppliers and exporters of products, We offer vacuum pump and many other products.

Please contact us for details.

Mail:sales@vacuum–pump.com

Manufacturer supplier exporter of vacuum pump

Recent Posts