Mustard Oil Expeller Black Seed Oil Sunflower Oil Press Machine Screw Oil Press Mini Crude Oil Refinery

Mustard Oil Expeller Black Seed Oil Sunflower Oil Press Machine Screw Oil Press Mini Crude Oil Refinery

mustard oil expeller black seed oil sunflower oil push equipment screw oil press Mini Crude Oil Refinery

Item Description

1.Compendium

Use rational refiner technological innovation, a small investment decision, simple operation. According to the quality of cake, change technological parameter, several types of oil grade can bu produced.
2.Scope and raw content
Scope:5T/D Palm Oil Refinery Line 
Uncooked material:

Acid(HOKmmg/g) :< 15.0
Impurity(%) :≤ 2.
Moisture and risky(%) :≤2.
3. Plan: Finished oil comply the Chinese CZPT
four.CZPT target
CZPTtric use:< 24 kw·h/t oil 
Cycle Water usage: < 15m3/t oil
Comfortable drinking water :< 180kg/t oil
 Accessory intake:Clay < 3%, phosphoric acid <0.2%
Refiner intake
L%=one- refining produce% has relation with high quality of rude oil and acid worth.
5.Description of the Procedure.

five.two. Description of major Approach
The crude palm oil has considerably less hydratable & non-hydratable phosphoric acid and substantial FFA. So the line is adopted the physical refining strategy, which is not only a lot much more inexpensive and successful than chemical refining, but also brings about no pollution through squander drinking water and exhaust air.

Degumming and Pre-bleaching Part:
Unique Degumming Section
Eliminate solubility impurity in the crude oil is degumming process. Because phosphoric acid is main part of solubility impurity in the crude oil. In business, degumming also is named to get rid of phosphoric acid. Ahead of distilling approach for physical refinery, take away solubility impurity is a very essential stage, it can minimize loss in the oil, enhance oil high quality.
The Crude oil filtered is pumped out from the Buffer Tank. Passing through dosing technique, the oil enters into the Warmth Exchanger to be Heated up to made temperature 60ºC. Then go into the mixer vessel for mixing with the the phosphoric aced included through the metering Pump. The mixture circulation into the acid reacting vessel for reacting for fifteen-20mins. 
Then individual the gums and oil by means of one particular centrifuge. Oil is exchanging heat to 70 degrees and stream into the pre-bleaching approach.
Info: 
Phosphoric acid (80-85%) .05 – .2% of crude oil
Operating time < 20mins
Steam < 100kg/t crude oil 

Pre-Decolorizer Method 
the oil degummed is pumped into the decolorizer, samely open the vacuum program to rise its temperature to get rid of off the dampness to begin with. 
The clay dosed circulation into the mixing tank/clay and oil firstly,, then inhaled into the decolorizer vessel with the vacuum situation, which mixing for 30mins or so below the 110 levels and vacuum problem, right after cooling(the decolorizer vessel has the h2o coil for cooling oil), the temperature to 70 degrees or so, which movement into the leaf filter for get rid of off the clay and oil go to the next method. 
Be aware: This method could get rid of out 40% purple shade/carotenoids, the a lot more is removed out from the distilling method.
Information: P < 5ppm,Fe ion < 0.1ppm, Cu < 0.01ppm
Distilling Procedure 
Pump the oil decolorized into the distilling vessel in the large vacuum, and 240 degrees -260degrees oil temperature, to distillate for 4hrs.
The FFA would be get rid of out with the immediate steam. 
The ultimate oil is out soon after exchanging between very hot oil distilled and oil decolorized.
Be aware: This method is not only eliminate out the FFA, but also odor and most of crimson color / Very hot delicate decolorization.

Fractionation of oils and fats Method 
Dry fractionation of oils and fats is the separation of higher-melting triglycerides from low-melting triglycerides by crystallization from the soften. Apart from mixing, it is the cheapest approach in oils and fats processing. It is a pure actual physical approach in comparison to other chemical modification processes such as hydrogenation and interesterification which modify triglycerides. Dry fractionation is now applied to several sorts of fat: palm oil, anhydrous milk unwanted fat, tallow, fish oil, lard, cottonseed oil, sunflower seed oil, palm kernel oil, tallow butter fats, and particular fats.

The most important purposes are: palm olein employed thoroughly as frying oil, palm super olein as salad oil and frying oil, the palm-mid portion as element of cocoa butter equivalent, palm kernel stearin as cocoa butter substitute, anhydrous milk body fat fractions for bakery and confectionery products, spreadable butter, tallow olein for frying oil and spreads. In this process, the excess fat is melted and heated to remove any crystal memory. The molten excess fat is cooled down under controlled agitation and cooling circumstances to make crystals nuclei fashioned by the higher melting triglycerides. Then, nuclei will increase to type crystals of the desired dimension. When the crystallisation has progressed far enough, the slurry is separated. 
The closing oil could be separated into 18degrees, 24degrees, 33degrees in accordance to melting levels.
Transmit hot oil CZPT
The furnace is an natural CZPT heating furnace with typical liquid oil for the medium the fuel could be coal and diesel oil, waste oil. The very hot temperature oil pump forcedly convey the scorching oil recycle into the employing program, realize to transmit the heats indirectly from the furnace to utilizing technique. 
The important is that the furnace is not higher pressure boiler, to reduce the inspecting expense every single 12 months.

Main Data: 

The power of Supporting Heat

Working 

Temperature

Working Pressure

Valve of Pipe

Coal/wood 

Use

Heat Efficiency

three*10fivekcal/h

≤340ºC

≤1MPa

80mm

sixty nine.five/100kg/h

≥70%

Vacuum Pump System

Steam and drinking water jet vacuum pump technique for distilling program.

Design

Max Force

Capability

H2o Pump

Steam Force

Steam Usage

Recycling CZPT Water Necessary

QSWJ-forty

3mmHg

40mthree/h

4kw

.3MPa

35kg/h

2.8t/h


Primary Initiatives Scope:

—–30-5000T/D cooking oil seeds pretreatment task
—–thirty-5000T/D cooking oil seeds extraction venture
—–ten-500T/D crude cooking oil refining machine 
—- 5-200T/D crude oil mill refinery machine 

—-10-2000T/D edible oil refining machine 

—-one-200T/D mini cooking oil mill plant

Our Services

CZPT & CZPT

Organization Info

ZheJiang Double CZPTs CZPTry I/E CO.,LTD

A professional collection of research ,design, production and sales of Oil generating machine,animal foods device ,extruder device for pet and snacks,and numerous other kind of foods device.

Our company has a big manufacturing factory with 40 years rich experiences based on one CZPT machinery started by our government machinery department, we adopts advanced production technology, sophisticated equipment and have won abundant strength after many years of development accumulation. 

Our puffed machinery has won the 1999 best national evaluation,and passed the ISO 9001 CZPT CZPT Authentication in 2000.More proudly, we have achieved the CE certificate to convenient more CZPTean customers.

Consumer Vist


CE&ISO Certification

Mustard Oil Expeller Black Seed Oil Sunflower Oil Press Machine Screw Oil Press Mini Crude Oil Refinery

vacuum pump

As one of leading vacuum pump manufacturers, suppliers and exporters of products, We offer vacuum pump and many other products.

Please contact us for details.

Mail:sales@vacuum–pump.com

Manufacturer supplier exporter of vacuum pump

Recent Posts