PLC handle system extruder very automatic plastic extruder equipment
This generation line adopts the most advanced technology of CZPTe,it is a new research accomplishment of energy-saving manufacturing line,which is suited for substantial speed extrusion of HDPE,PP and other polyolefin pipe.compared with common production line,the vitality-preserving influence get to on 35%, and the item performance enhance much more than one times, therefore it is not only saving the price of website and manpower,but also strengthening effectiveness.This generation line has good appearance,greater automatical degree ,creation dependable and steady.

This image is just for reference. 

This extruder is utilized for PE110-315 pipe extrusion line. It is made up of screw, barrel, gearbox and driving motor. The diameter of the screw is 75mm. It is created of 38CrMoAlA and adopts the therapy of Nitrided. The barrel is made of 38CrMoAlA. Like the screw, it is Nitrided treatment. The barrel has six heating management zones. The complete heating power of it is 30kw. Its cooling program is brower supporter and the cooling electrical power is one.5kw. The matrial of the residence is QT200. The sort of the gear is Helical gears and the material is 20CrMnTi. It uses the Quenching of the gear area. Bearings are Chinese CZPT bearings. Its lubricating system is press program. At the very same time, its cooling system is individual. The approach of the feeding block is water cycle. The content is Q235. Then it is an DC motor. The electrical power of it is 132kw. 

The 25/25 one screw extruder is for coloration strip. The diameter of its screw is 25mm. It is Nitrided treatment. The substance of the barrel is 38CrMoAlA. It has two heating manage zones. Every heating electrical power is one.2kw. The parts of this type of gearbox is as the very same as the gearbox in the extruder. But Lubricating system is Splashing system. Also its feeding block is like the feeding block in extruder. It has an AC motor with the power of 1.5KW.

This photo is just for reference. 

The mould is spiral variety. Its mouth die and core die are changeable. It have ten heating manage zones. The heating power will up to max 36kw. The calibration unit is large-quality with resistance copper. The vacuum pump is 5.5kw and the drinking water pump is seven.5kw.  It is 5.8 meters prolonged. And the stoke is 500mm.

This photograph is just for reference.

The cooling tank is stainless metal. The method of the cooling tank is spraying. And each set water pump is 4kw. The duration of it is also 6m.

This image is just for reference. 

This haul-off device with pneumatic pressing is utilized for PE110-315 pipe extrusion line. The method of this haul-off device obtaining 4 caterpillars is rubber block caterpillar. The duration of the caterpillar is1.8m. It uses  AC motors with .75kw of each.  

This photo is just for reference. 

This cutter is employed for PE110-315 pipe extrusion line. It is no dust reducing with pneumatic pressing. The shifting method of the platform is also a pneumatic way. This cutter is suitable for the pipes with diameter ranged from 110-315mm. The motor of this cutter is 4kw. 
 

Variety	Diameter(mm)	Extruder	Major motro power(kw)	Potential(kg/h)
JWPEG-63	Φ20-Φ63	JWS65/33	forty five/fifty five/75/90	120-two hundred
JWPEG-a hundred and ten	Φ20-Φ110	JWS65/33	forty five/fifty five/seventy five/ninety	one hundred twenty-two hundred
JWPEG-one hundred sixty	Φ63~Φ160	JWS65/33	45/fifty five/seventy five/90	120-200
JWPEG-250	Φ75~Φ250	JWS75/33	75/90/a hundred and ten/132	two hundred-350
JWPEG-315	Φ90-Φ315	JWS75/33	75/90/one hundred ten/132	200-350
JWPEG-450	Φ160~Φ450	JWS90/33	a hundred and ten/132/one hundred sixty/185/250	350-550
JWPEG-630	Φ315~Φ630	JWS120/33	355/400	a thousand-1300

CZPT & CZPT:

• CZPT package for Jwell plastic profile sheet extrusion machine for PVC.
• Jwell produces a lot more than 2000 sets of extrusion devices each and every 12 months, which has been bought to all above the planet, including CZPTica, Brazil, Japan, Korea, India, Germany, Turnkey, Malaysia.and so forth.

 

Transient Infomation of JWELL CZPT CO., LTD

• The largest plastic extrusion manufacturer in China with eighteen specialist subsidiaries, 9 large steel-functioning workshops and 4 massive warmth-remedy nitration workshops.
• Founded in ZheJiang , China 1997,has developed into five creation bases such as ZheJiang , HangZhou, HangZhou, HangZhou and HangZhou with a lot more than 1000mu area.
• JWELL CZPT (HangZhou) CO., LTD. is yet another advancement strategy center of ZheJiang JWELL CZPTry Co.,ltd, locating at CZPTsu Zhongguan cun engineering industrial park, CZPT city, CZPTsu province.
• We have a large qualified R&D and knowledgeable mechanical and electrical engineer group as nicely as superior processing basis and normative assembly shop.

Jwell Lifestyle:

• Jwell CZPT Spirit: Attentive,Edurung,Fast and Orderly    
• Jwell CZPT CZPTation:Superb efficiency, Best CZPT
• Core Concept:Be trustworthy to people,Be faithful to Jwell.

 

Our Services
All to start and hold great & long-term cooperation with you.

• We are the largest plastic extrusion maker in China with eighteen skilled subsidiaries, nine big steel-doing work workshops and four large heat-remedy nitration workshops.  
• Production capacity:20 established/sets for every Month.
• We  can supply on-site installation and debugging companies freely, like operation practice and uncooked material method , to insure the client can run autonomously.
• Warranty:twelve months.

Certificates:   

FAQ
Q1–How much does it price?

     –Make sure you fill in your distinct need in the bottom blank and sent to us, so that we could make a element quotation for you.

 

Q2:–I want to know a lot more about your company and your items, how?

      –For more data, please check out our internet site: www.jwell.cn or www.jwellcz.cn. The very best way, of program, is to go to our manufacturing unit and see our products. Jwell welcomes your coming at any time!

 

Q3:– How about your right after-sale services?

     –When the equipment are prepared and be despatched to your manufacturing unit, we will sent our engineers to your factory to assist your employee to do the installation and practice your employees. Previously mentioned all, we have the maintenance engineers all above the globe, who are constantly completely ready to go to our customer’s manufacturing unit and give them with the very best right after-sale service

 

This fall:–Exactly where is your factory located?

     –We are in No.118, Shangshang Road, CZPT, HangZhou metropolis, CZPTsu province. welcome to pay a visit to us!!!

 

Q5…………………………………………………………………………..

 

For more infomation about Jwell Large effectiveness fast assemble board extrusion line , make sure you visit our internet site

 

URL:http://www.jwell.cn             http:www.jwellcz.cn