SS316L Forced circulation evaporator 

 

This is a System for Ammonium Sulfate manufacturing named Double Result Pressured Type Circulation Evaporation Crystallizer, Or Double Impact OSLO Crystallizer. feeding is liquid, final merchandise is the salt for promoting. 

 

Double Effect Forced Kind Circulation Evaporation Crystallizer is doing work beneath vacuum, so it is strength saving. compelled sort pump also aid for slurry crystal liquid circulation, ignore pipeline blocking or scaling. 

 

Double Influence Compelled Kind Circulation Evaporation Crystallizer combined with 1st effect heater, 1st impact separator, 2nd impact heater, 2nd impact separator, 1st preheater, 2nd preheater, 3rd preheater, 4th preheater,and condenser, pumps, pipeline and valves etc. 

 

Double Effect Compelled Kind Circulation Evaporation Crystallizer is also match for continue production of : Sodium Sulfate, Ammonium Sulfate, Tomato Paste creation, NaCl , lithium carbonate ,substantial salt waste h2o and so forth. 

 

This machine is CZPT with conductive oil heating with secure temperature of 200-220ºC

 

Pursuing is the photograph which machinery put in in client’s manufacturing facility:

one. Introduction for pressured circulation evaporator 

 

1) . Double impact pressured circulation evaporator 

Design : GLFC-02-XXXX

Handing ability ( (T/hr ) : 2,four,five,6,ten,11…

 

2) . Single result pressured circulation evaporator :

Model : GLFC-02-XXXX

Handing ability ( T/ hr ) : 1,1.5,two…

 

two. Software Region : 

It is ideal for the evaporation and crystallization of materials with substantial focus, higher viscosity, insoluble solids and so on .

For case in point, the restoration of sodium chloride, sodium sulfate, ammonium chloride, ammonium sulfate, and so on.

 

three. Primarily parameter :

 

one). The focus ratio is huge and the circulation sort is pressured, so that the liquid with larger viscosity is effortless to movement and evaporate.

two).Via the forced circulation, the evaporator can be heated evenly in the tube and can stop the “dry wall” phenomenon.

3).The disadvantages are mostly the huge volume of the pump and the reasonably high electricity intake. At the very same time, thanks to the huge movement of the pump, the tools will vibrate tremendously and it need to be hooked up to the support of the workshop or the metal composition.

 

four.Program introduction 

Evaporator, separator (crystallizer), condenser, circulation pump, inter action pump or material manage valve, vacuum and drainage technique, sub cylinder, procedure system, electrical instrument handle cupboard, valve and pipeline system.