Five CZPT Purpose
- Dry run protection
If pump works in water shortage status,the pump starts working, and then stop. The pump will repeat this process automatically, to make sure it will work properly once resumes in enough water.This dry run protection function can avoid pump burned in the water shortage status. - Stuck protectionIf the pump is stuck because it is not cleaned periodically. There is a “ERR” warning signal. And the pump will restart for 5 times, which can eliminate tiny impurities. After restarting 5 times, we can clearly know that the pump must be stopped for cleaning.
- Over voltage protection
When there is something wrong with adapter, the voltage becomes higher. The controller starts protection status, the display shows “ERR” warnings. This can avoid controller burned. - Low voltage protection
When the consumption power is low, the displays shows “ERR” warning. - This can avoid insufficient flow rate.
- Overloading protection
When the pipe is blocked, or too many impurities in pump body, the pump will be over loaded. The pump will send out the waring signal and trigger protection function. It will be continuously started working to avoid being burned.
Upkeep
1. Make sure you clear the wave pump frequently to ensure their usefulness.
two. If there have water on the area of the controller, make sure you wipe with dry fabric to avoid drinking water from moving into the control box.
three. When the pump quit operating, initial check out the power adapter, then get rid of the foot of pump, open up the pump lid by counterclockwise rotation, then thoroughly clean the inner aspect of the pump.
4. This product is used in indoor, don’t allow the controller and adapter slide into the h2o so as to lead to needless losses.
Observe
1. Dry operating is not allowed in purchase to ensure the solution overall performance.
two. Maintain the controller and adapter absent from water and h2o splash.
three. To stay away from hurt you should never open up the controller and adapter.