SMT Line Stencil Printer+ Decide and Spot CZPT+Reflow Oven
Manual precision stencil printer T4030:
Handbook substantial precision screen printing T4030 is the gear which is utilised for printing or leakage printing engineering. The location is mainly by hand to pick-and-area PCB board and print. It has a low-expense and effortless to use, straightforward to find out, higher successful, it is suited for small and medium manufacture, multi-species research, advancement and manufacturing.
CZPT parameter:
Max printing region: . 400× 300mm
Adjustment strategy: Contrapuntal calibration
Refined adjustment strategy: Alter via precision screen pole, the precision: .1mm.
Suited variety: Silk screen and steel display
Excess weight: 20 kg
Dimension: seven hundred*600*350 mm
Guide select and location machine TP39V
[Profile]:
TP39V is made specially for modest and center-sized manufactures and institutes. Different nozzles can be fastened on the device and all types of chips can be picked and put, for case in point diode, dynatron, SOT, SOP, PLCC, QFP, chip resistance, chip capacitor and other folks. Vacuum pump within. Large precision with very good cameral.
[Procedure process]:
24 types of chips can be hold by the disc feeder. 15 varieties of chips can be laid on the Belt feeder at most. First, lay all the chips on the feeder in accordance to the real generation desire. Then turn on the energy and shift the decide and place head to the leading of the chips. The chip will be picked by the nozzle instantly. After that, go the head to the appropriate pad on the PCB. Then discover the right pad with the help of the cameral and rotate the head and end the alignment. Then simply press the mounting head down and stage on the foot change to conclude the mount of the chip.
[Improvements]:
one. Large accuracy and stability of the select and spot head during high-speed motion is guarantied by precise manual tracks with eyesight situation.
2. According with Xihu (West Lake) Dis.n CZPT. Ease the employee.
3. CZPT rotating feeder heightens the perform effectiveness. CZPT feed after urgent the button.
[Specification]:
1. CZPT four-dimensional degree of flexibility:
X, Y axis have precision device which can attain the wonderful tuning in the instructions of X and Y axis. Z axis can be freely modified. At the same time the angle θ can be freely rotated.
two. Mounter TP39V has a 4D mechanical degree of liberty. Provided with high precision guidebook tracks for X, Y axis. Mounting Head can be precisely moved vertically and horizontally. Max. Distance for X axis: 550mm Y axis 260mm. Z axis is provided with high accuracy manual tracks and sealed bearings. The mounting head can go up and down efficiently so that a substantial accuracy can be ensured during choosing and positioning. Length for Z axis: 30mm.
three. Rotatable select and place head. Angle θ has a cost-free rotation of 360° .
four. Max mounting size of PCB: 180× 300mm
5. Disk Feeder can rotate in both optimistic and unfavorable direction.
6. Decide and area velocity: three hundred-600 p/h
7. Weight: 35 kg
eight. Dimension: 710mm x 610mm x 500mm
Lead totally free reflow oven with temperature screening T200C
T200C engineering parameters
A: Temperature control segment: 40 segments
The phase can be established in personal computer according to the real necessity.
B: Temperature-zone quantities: Solitary-zone and multi-phase
C: Temperature control method: Computer manage method, SSR non-get in touch with output
D: Temperature precision: ± 2 ° C
E: Warm-up time: 3min
F: Temperature variety: Place-temperature -360 ° C
G: Heating supply: Infrared ray + Sizzling air convection
H: Efficient doing work table location: 360mm * 230mm (a lot more than A4)
I: Welding time: 3min ± 1min
J Temperature curve: It can be set, modified and analyzed in accordance to the true prerequisite.
K: CZPT technique: Transverse stream equal cooling
N: Rated voltage: AC one-stage, 220V 50Hz
O: Rated energy: three.8KW Imply electrical power: one.6kw
P: Excess weight: 39 kg
Our Company: