25L 250°C Vacuum Oven (12x12x11″) with Programmable Controller & Flowmeter
DZF-6571-collection is the advanced vacuum & Ambiance drying oven put in with KFD25 adapter and Gas inlet, CZPT movement-meter with optional vacuum pump, which enable the fuel purging, gasoline mixing beneath preferred pressure amount and steady
inert gasoline flowing compared to conventional vacuum oven. CE licensed or UL completely ready variation is optional.
CZPT Parameters
Model | CY-DZF-6571 |
Chamber and Door | The chamber is structured with stainless steel and welded with bracing pieces. A good vacuum seal is achieved by silicone door gasket and positive latch door. Observation window consists of termpered glass and transparent polycarbonate shield. 2 stainless steel shelves are included to facilitate processing efficiency. |
Inner Chamber size | 300 mm x 300 mm x 275 mm (12 x 12 x 11″, 25 Liter) |
Gas flowing/purging | A precise flow meter is installed in the front panel which ranges from 200 ~ 2000ml/min. One 1/four” swagelok tube fittings on the back panel to connect the gas supply. The gas is able to be continuously flowing into the chamber at a constant flow rate defined by user during operation. The oven can be purged by inert gas before operation. |
Vacuum Pump (optional) |
Vacuum pumpdose not include. Please order separately. One stage pump (For achieving a vacuum < 2 torr) Two stage pump (For achieving a vacuum < 700 m-torr) |
Working Voltage | 110VAC or 220VAC +/-10% selectable at option bar, 1000W Max. |
Heating Rate | four~6 ºC/min |
Working Temperature | RT ~ 200°C for continuous 200°C ~ 250°C for <4hrs Maximum Heating Rate: 4~6 ºC/min |
Temperature Controller |
30 segments programmable Created-in over-temperature protection PID precise temperature control Temperature uniformity: +/-5°C @ 100°C, 25″ Hg at center 6″x6″ area only |
Fittings | KF-25 vacuum port connected on the back panel KF-D25 Flexible CZPT Steel Vacuum Hose (Bellows), 1 meter Two sets of KF-25 Quick Clamp with CZPT O-Ring This oven comes with a KF-25 vacuum connector. If you need KF-40 connector, please order the adptor of KF-25 to KF40 One KF25D vacuum port is used for quick connection to vacuum pump |
Dimensions | Oven: 650 x 610 x 530mm (L x W x H) |
CZPT Weight & Dimensions |
forty” x 35″ x 29″ (L x W x H) 200 Lbs after crating |
HangZhou CY CZPT CZPT Co., Ltd is largely engaged in the research and development, layout, producing and income of gear utilized in scientific researches. Independence and innovation is the firm’s tenet.Our main merchandise incorporate: tube furnace, muffle furnace, plasma cleaner, vacuum furnace, ambiance furnace,CVD system and CZPT
lab equipment.Welcome you occur to visit us.