Two Stage Compounding CZPT for Silance Cross Hyperlink Pelletizing
Definition:
Silane cross linking cable materials pellets granulating device is designed by using the constructing block principle, which can make the plastic extrusion machine modified in accordance to the materials qualities and process technological innovation simply.
It is attainable for 1 equipment get to the substantial functionality and particular function in many area.
Silane cross linking cable substance pellets granulating machine is common also because its outstanding dispersing and compounding as properly excellent self-thoroughly clean efficiency.
Qualities of solution:
1. Higher resistance to breakdown strength
two. Minimal dielectric decline
3. Good and steady insulation
4. Excellent softness
5. Excellent mechanical houses and electrical properties
six. Robust acid and alkali resistance, very good chemical stability
Application:
It is Suitable for the cable which is getting PE as uncooked material
Creation line:
Introduction of ATS two-phase compounding line:
To generate PE cable supplies, we typically use ATS two-phase compounding line. ATS Two-stage compounding line contains ATE Twin screw extruder, ASE Single screw extruder and down-stream pelletizing program. The 1st phase is to recognize the polymers compounding job, CZPT stage is to extrude the compounds with gentle and reduced temperature, then pelletizing through the down-stream slicing program.
Attribute of this production line:
CZPT the plasticization, compounding and graft by huge slenderness ratio co-rotating twin-screw extruder. Drop the temperature, construct up the pressure, extrusion, pelletizing by low-pace single screw extruder. Employing this technological innovation can achieve far more adaptable procedure, enhance complex condition and best product’s overall performance than employing one-stage extruder.
About the pelletizing technique:
Several chopping systems also can be adopted in the ATS compounding line. Many thanks to the modular layout theory, equally CZPT handle and PLC control are also available to be used in the ATS electrical controlling program. All the key electrical elements undertake CZPTean manufacturers to promise the managing technique with important and secure overall performance.
To make PE cable supplies, we usually use the pelletizing system: h2o-cooling die-face sizzling reducing. It has the advantage: blend substantial-speech and powerful-compounding of twin-screw extruder with reduced-speech, reduced-temperature and weak-shear of single-screw extruder. It is the first choice when produce warmth-sensitive or shear-delicate content.
Manufacturing method:
one. Uncooked materials shop
2. Dryness hopper
3. Molecular screen drier
four. Raw material tank
5. Reduction-in-excess weight metering pump
6. Reduction-in-bodyweight electronic equilibrium
seven. Primary twin-screw extruder
eight. Primary one-screw extruder
nine. Drinking water-ring pelletizer
10. Centrifugal hydro-extractor
11. Boiling bed
twelve. Vacuum feed system
13. Molecular monitor drier
fourteen. Drying hopper
15. Solution hopper
sixteen. Vacuum packing machine
Silane cross linking cable content pellets granulating machine have four primary types with different output which cover virtually all types of specific and typical application demands of extruders.
We believe each and every type of extruder has its ideal application situation. You could decide on the extruder sort in accordance to your special needs.
Principal technical specification
| CZPT dimensions | CZPT Diameter(mm) | CZPT Pace Max.(rpm) | Motor Electrical power(Kw) | Throughput Charge(Kg/h) | |
| ATS52/a hundred and twenty | ATE52 | 51.four | 600 | fifty five | 150-300 |
| ASE120 | a hundred and twenty | eighty five | 37 | ||
| ATS65/one hundred fifty | ATE52 | 62.4 | 600 | 90 | three hundred-500 |
| ASE150 | one hundred fifty | 85 | 45 | ||
| ATS75/one hundred eighty | ATE75 | seventy one | 600 | 132 | 500-800 |
| ASE180 | 180 | eighty five | 55 | ||
| ATS95/two hundred | ATE95 | ninety three | 600 | 250 | 800-1500 |
| ASE200 | two hundred | 85 | seventy five | ||
Characteristics of this established of tools:
one. Great mixing impact and the temperature manage is hassle-free
2. Covers a modest spot and does not want huge electric power
3. Uncooked materials mixing and granulating are entirely automatic, human demand is modest
4. Higher-protection and can decrease raw materials’ injury and deterioration
About our services:
PE Cable Extruder Just before-sale
1. Introduce products and applications detain
2. Recommend suitable solution
3. Provide with reference information
four. Offer lab for test
During CZPT
1. Provide with layout and engineering conditions
2. Inform the project processing status
three. Offer other documents
Following-sale
1. Provide with installation, commissioning and training
2. Register and record customer information
three. Offer spare parts
4. Provide with necessary technical support for new application
five. Visit customer regularly and correct information
Why select us
1. Reduce expenditure cost for a higher quality and tough equipment
2. Reduced vitality intake with substantial manufacturing output
3. Overseas set up and education are accessible
four. CZPT guarantee with spares in stocking and in-time shipping and delivery
5. CZPT machine delivery and set up: AceRetech makes on an typical of ten sets of plastic machines per thirty day period and can produce the machine quicker than most producers. The regular delivery time of an AceRetech recycling device is 60 times.